cor ten welding flat cladding facade

cor ten welding flat cladding facade for building,office block, Landscape Architecture.

Cor ten building facade

Materials: Corten A/SPA-H Thickness: 2.5mm, 3.0mm, 5mm

Panel width: 300-900mm

Height: 30-100mm

Length: 200-6000mm

Gap spacing: 5-25mm  

Fixing: Corten back frame welding or bolt connection.                              

Areas of Application:

Areas of application: Vertical walls (slope 90°).

Type of building: New construction or renovation.

Supporting structure: Concrete wall, brickwork, metal as main support.

Installation:

Before any installation, a detailed layout plan should be drawn by the contractor in order to:

1.Establish the positioning of the secondary framework elements.

2.Calculate the exact measurements and quantity of corten cladding (centre to centre height and length and the width of the joint).

3.Position the fastening accessories (clips and screws), welding point and framework rails.

corten welding cladding facade front side

Corten welding flat cladding back side

connection method of corten cladding with wall frame

Remark: The back side of corten panel should be coated with anti-rust paint to prevent rust water to polluting the environment and destroying the rust surface on the front.